BONELUST Q&A: "How do I put mandibles back together & teeth in?"

There are many ways to reattach two mandible halves that have come apart. Depends on the species. I prefer to use regular white school glue because you don't always get it right first time around. I also use this same glue to put teeth back in. It is water soluble so you just soak it in water, wash off the glue, let it dry & re-glue. Also, not all mandibles can simply be put back together. Some are lacking muscle where they once connected and do not perfectly fit together anymore once the flesh is gone. That's why sometimes you see people using rubber bands to hold the two jawbone halves together on deer, goats and similar species. For a small mandible like this cat skull I just put a small dab of glue where they connect then rest the two halves balanced together with the skull flipped over. Always be sure the mandible fits the skull properly before it dries. This flip over and balance trick doesn't work for everything obviously. Sometimes you just have to carefully tape the end after applying the glue. And sometimes some mandible shapes let you clip them together while they dry with a clothespin. You just have to figure out what works best for you. It is also important that all incisors are already sealed into place before you attach the mandible halves. Otherwise glue may fill the holes where their roots go.

Here's a related blog post - BONELUST Q&A: "The teeth fell out of my skull! Did I do something wrong? How do I fix it?"

BONELUST Q&A: "How will I know if a skull needs degreasing, I'm not sure what it even looks like?"

These are my two Mountain Lion skulls. The natural body oils are very apparent on the specimen on the left. The golden coloration is a dead give away that it was never properly processed. Some factors to keep in mind though: yellow can also mean that it was once boiled or chlorine bleach was used in the processing. So avoid both of those things! You can not undo bone that was yellowed by chlorine bleach. It may appear white at first but over time it will yellow. A full rolling boil will draw grease deeper into the bone rather than making it rise to the surface. Once done it is very hard to degrease. Last factor to consider is that the skull on the left was sold to me as "antique". I will be attempting to properly processing this skull in the near future. Only then will I know the true answers to the history of this skull. The skull on the right is still mildly greasy to the eye & touch but not so bad that I feel the need to degrease. Degreasing is a step in bone processing that is purely for preference to the bone collector. I honestly rarely need to degrease anything because it gets mostly taken care of during maceration. With experience you will be able to tell by touch, color and weight if you need to degrease. 


For long term preservation, too much oil in bone is bad because bacteria can turn grease into acid and thus damage the bone. But at the same time, 100% grease free makes bone more fragile because grease is a part its natural components and sometimes bones can even shrink a little. A little grease left in bone is best for the longest preservation. I was told by a university teacher that some museums stopped to degrease fully and whiten specimens devoted to research. Now they only do the total bone degreasing for displayed specimens that will not be handled at all. So keep this in mind when deciding on whether you want to degrease or not. I have absolutely noticed a difference in quality of the bones I will or won't use in my jewelry. If they have been fully degreased they just don't seem to be up for being a wearable piece of art that could take daily wear. They also have very little weight which is not good for say a pendant for example.

More related extensive info here:
Whitening Bone Using Hydrogen Peroxide NOT Chlorine BleachBad Words: BOIL & BLEACH

The Mathematics Of Maceration - A HowTo Guide For The Impatient

A HowTo Guide For My Crock Pot Methods

Whitening Bone Using Hydrogen Peroxide NOT Chlorine Bleach

I recently edited my Bad Words: BOIL & BLEACH post here adding much more extensive info about using hydrogen peroxide (H2O2). Posting it as a new blog with even more info and photos so you guys don't miss this important info.


In the H2O2 bath.


Drying after the H2O2 bath.

NEVER use chlorine bleach on bones.

Chlorine based bleach permanently damages the bone itself. It will start to break down the structure of the bone and will continue to even after it is rinsed and dried. Resulting in chalky, fragile and extremely porous bone that will turn to bone meal with age. Not to mention it turns the bone yellow. Which pretty much defeats the purpose if you are trying to whiten the bone. It may appear white at first but will turn yellow. Once it yellows from bleach there is nothing you can do about it. Believe me, I've tried to salvage yellow bleached skulls before to no avail.



To sanitize and whiten bone use regular household hydrogen peroxide (H2O2) that you can easily and inexpensively get ahold of at the grocery store, dollar store or drugstore. Do a 50/50 bath with water just above the bones in a loose lidded plastic container to reduce evaporation. Oxygen activates the peroxide so you want to let air get to it. But it will evaporate so keep an eye on it and top it off as needed. Also, if you have a tight lid on it pressure may build up and the top literally blows off.


Lids are loose to let oxygen in and pressure out.

How long? Just keep the bones in this bath until they are the color you want them. This is a personal preference. Note that the bone will dry lighter than it looks wet. This process can take days or weeks. Although if you leave it too long it will eventually make the bone brittle. But this usually would take months for medium sized bones like say of a raccoon. This is a very safe process for most bones if you properly follow my steps. When done whitening, rinse the bones in water then lay out to dry in the sun on towels or dry inside with a fan on. I put towels or paper towels under the bones to help pull moisture out. Be sure the bones are dry before you put them in a sealed container for storage or they may mold.


Sun drying bones.

More About Mold

These were bright white cleaned bones. I thought I had left them out to dry long enough but apparently hadn't. I bagged them up in a ziploc and put them in my supply drawer. Only to find some time later that the had become splotched with black mold through the bone core and on the outside. I soaked them for weeks in full strength hydrogen peroxide but they only got this white again. In the closeup on top you can see the actual mold inside the bone. I think the molding also had to do with the bone needing to be degreased more. The mold spread to all bones in the batch though. Those not needing degreasing as well.



These bones had been cleaned and dried but got humid and grew a green fuzzy mold on them. Luckily I just hosed them off and gave them a H2O2 bath and they cleaned up beautifully. So this is a reminder to store bones in a dry place.



Important factors: If your H2O2 bath gets really cloudy you likely need to dump it out and start a new bath. Otherwise it will start to macerate instead. Do not use a metal container with H2O2. Use plastic or glass. Store in a cool dark place. Direct sunlight will eventually deactivate H2O2 that's why it comes in dark containers. Do not do this step outside with no lid. You will just end up with deactivated H2O2, algae and insect larvae all over you bones and you'll have to start over... or the bones may be ruined.


Bubbles is a good sign your H2O2 is still active.

DO NOT use hair developer type peroxide on bones, ever.

There are additional ingredients in it besides H2O2 and it is MUCH stronger than regular corner store purchased H2O2. Which I think is only 3%. I have experimented with this myself and the developer turned huge deer vertebrae to literally mush in my hands. Likewise, do not use the powdered hair bleach packets. The same results will happen. So you've been warned!


Improperly processed vertebrae that turned to mush in my hands.

Algae & Moss Covered Nature Cleaned Bones

Note that some staining will not come out especially if bones were decaying on the forest floor for some time. Remember, you want to be sure the bones have already been degreased and cleaned of all flesh/dirt/etc before putting into the peroxide.



Too late to clean and whiten these bones. After bones have been left in the elements for some time they begin to break down. These bones are now "living" again covered with algae/fungi that is eating it. This is one reason I choose not to do the bury method. If you wait too long bones have already begun to decay. I like processing methods where I can see what is happening to the remains at all times.



BONE PROCESSING BLOG POST WITH TIMELINE:



See the post that goes along with the above photo here -  BONELUST BONE PROCESSING PROGRESS: First Adult Goat Skull processing progression photos & timeline.

For even more extensive info about all the steps I use in processing bones check out the rest of my blog. Enjoy!